Intelligent Power Control
Coming in 2024! Presidor™ Lighting Panels permit a selection of both LED dimmer and relays in the same enclosure for highly efficient and cost-effective installations. DMX input with optional DIN rail node allows for wide application in two panel sizes. Small panels are available in either 8 or 12 channels while the large panel supports up the 24 channels. The large panel also has an optional splitter panel with local 3 pole 40 Amp disconnect breaker for larger installations. Panels can be ordered custom built with the modules of choice pre-installed at the factory in the chosen order. Module choices are quad dimmer, quad relay or dual relay. Intelligent dimmers are state-of-the-art reverse phase controlled rated at 600W and will dim both LED and incandescent loads over a full range of dimming (1-100% DMX). Air-gap relays are triggered ON/OFF at selectable DMX% thresholds from 10-90%. 0-10VDC analog outputs can be programmed as source or sink to permit direct drive of analog ballasts. Sensing protection on all circuits includes overload, short-circuit, temperature, over-voltage, inductive load and more. Both LED indication and real time error reporting back to the command control provide advanced feature reporting normally only found in very expensive dimmers. The Presidor™ Command Controller provides a full color, capacitive touch GUI for ease of set up and automatic error reporting. Intuitive operation and smart capabilities make these panels unique.
- Reverse phase LED dimmers and air-gap relays in one panel.
- Dimmers employ MOSFET power outputs for unsurpassed dimming efficiency (≥99%).
- Relay modules employ 277VAC rated 50 AMP tungsten “Air-Gap” Relays.
- Modular design permits ease of panel configuration.
- DMX input with optional Ethernet node.
- Analog 0-10VDC source or sink on the relay outputs.
- Available in 8, 12 or 24 channel.
- Optional local disconnect breaker.
- Intelligent load and error sensing and reporting.
- Full color, capacitive touch GUI Command Control.
- Ultra-low standby power for “Green” compliancy.
- UL Listed Pending.
- 19 U.S., Canadian, and European Patents issued!
Module Types
Dimmer Module
Relay Module
Relay Module
Airflow Module
How to Order
Select Panel Size based on the maximum number of modules/channels possible:
| Model | Description/Maximum Output Capacity |
|---|---|
| PP-8 | 2 modules or 8 channels maximum |
| PP-12 | 3 modules or 12 channels maximum |
| PP-24 | 6 modules or 24 channels maximum |
- Select panel size, choices 8, 12 or 24
- Select voltage input, choices 120/208 or 120/240
- Select output/module type in order from top to bottom, choices L, 4, 2, or A
- Select disconnect breaker option (DB) if applicable.
Ordering Information
| Model | Description/Maximum Output Capacity |
|---|---|
| PP-8 | Small panel, 2 module capacity, Maximum 8 load circuits, Maximum capacity 4,800 Watts. |
| PP-12 | Small panel, 3 module capacity, Maximum 12 load circuits, Maximum capacity 7,200 Watts. |
| PP-24 | Large panel, 6 module capacity, Maximum 24 load circuits, Maximum capacity 14,400 Watts. |
| DB | Optional 3P40A Disconnect Breaker. For PP-24 only! |
| Type L | Quad LED Dimmers, 4 x 600W Intelligent Dimmers. Maximum capacity 2,400 Watts. |
| Type 4 | Quad Air-Gap Relays, 4 x 600W Intelligent Relays. Maximum capacity 2,400 Watts. |
| Type 2 | Dual Air-Gap Relays, 2 x 1,200W Intelligent Relays. Maximum capacity 2,400 Watts. |
| Type A | Airflow/Block-off. Permits future panel capacity expansion. |
CONTACT US
Tell Us About Your Lighting Control Project
Have a question about your lighting control system needs?
Already know what you’re looking for?
Fill out the form to submit a purchase order today.