Discontinued Product

Firing Cards

Limited stock available while quantities last. One (1) year warranty.

Several models of replacement firing cards are available designed to retrofit or upgrade older analog dimmers. Digital models includes onboard software that ensures a reliable and accurate high-speed dimmer response. Features offered include SCR, Triac, SSR (solid state relay) and non-dim Relay driver outputs, LED status for power, control and load, curve select, load preheat, line voltage regulation and much more! Digital models will operate from 85 to 265 volts at 50 or 60 Hz, thereby allowing universal application. Economically priced, this expanding range of product is VERY different from all competitive models!

FC-DMX Universal Digital Firing Card.

  • DMX and/or analog input (MERGE).
  • SCR or SSR (PWM) drive applications.
  • Selectable curves and pre-heat.
  • LED status indicators.
  • Quality “break-away” terminals.

FC-MACRO Firing Card.

  • Direct replacement firing card for Macro dimmers.
  • DMX and/or analog in.
  • SSR (120V) or SCR (277V) output drive.
  • Selectable curves and pre-heat.
  • LED status indicators.
  • Quality “break-away” terminals.

FC-22AB-SCR Universal Analog Firing Card.

  • Digital design eliminates curving/adjusting.
  • SCR and SSR drive outputs.
  • Selectable curves and pre-heat.
  • LED status indicators.
  • Quality “break-away” terminals.

FC-22AB-Triac Universal Analog Firing Card.

  • Digital replacement firing card for analog input and Triac drive applications.
  • Triac and drive outputs.
  • Selectable curves and pre-heat.
  • LED status indicators.
  • Quality “break-away” terminals.

FC-ADC-1 Universal Analog Firing Card.

  • Low cost.
  • SCR and SSR drive outputs.
  • Lamp pre-heat adjust.
  • LED status indicators.
  • Quality “break-away” terminals.

FC-445 (with front of dimmer on the left side).

  • Alpha architectural dimmer replacement.
  • Digital design eliminates curving/adjusting.
  • SCR drive outputs.
  • Selectable curves and pre-heat.
  • LED status indicators line up with the frame “trim” holes.
  • 30 Amp power terminals.

FC-233 (with front of dimmer on the right side).

  • Electro Controls Modular dimmer replacement. Replaces PCB’s 231, 232, 233 and 328.
  • Pin to pin compatible with OEM wiring harness.
  • Low cost design.
  • Lamp pre-heat adjust.
  • LED status indicators line up with the frame “trim” holes.
  • Selectable 10 or 15 VDC input.

FC-330 (with front of dimmer on right side).

  • Electro Control Quad dimmer replacement (4 channels per card).
  • Pin to pin compatible with OEM wiring harness.
  • Designed for use with or without the QD-2000 rack electronic retrofit.
  • Easy access “non-dim” switches.
  • Improved design for accurate LED display of phase reference, control and load levels.
  • EC Quad dimmer support parts.

FC-433 Non-Dim Relay.

  • Designed for switching non-dimmed loads via analog DC. Ideally suited for control of AC fans, fluorescent lighting, etc.
  • Rated for 50 Amps at 120 Volts. Higher ratings available.
  • Built in “offset” activates relay above 1.5VDC.
  • High input impedance for very low power input trigger requirement.
  • Requires 12VDC supply.

Ordering Information

ModelApplication
CD-3000+AEStrand CD80® AMX or Advanced Electronic (AE) permanent installation racks.
CD-3000+AE-48RRStrand CD80® AMX or Advanced Electronic (AE) 48 channel rolling racks.
CD-3000+AE-96RRStrand CD80® AMX or Advanced Electronic (AE) 96 channel rolling racks.
CD-3000+SVStrand CD80® Supervisor (SV) permanent installation racks.
CD-3000+SV-48RRStrand CD80® Supervisor (SV) 48 channel rolling racks.
CD-3000+SV-96RRStrand CD80® Supervisor (SV) 96 channel rolling racks.
CD-3000+C21Strand/Signify C21 permanent installation racks.
i96e-3000Leviton Colortran i series e dimmer racks.

NOTE: Custom PCB layouts and designs are available for O.E.M. applications by others. Please contact the factory.

Click here to view our JSI DMX to Analog Convertors

JSI Manufacturing offers many other derivatives of the above designs.

Custom PCB layouts and designs are available for OEM applications by others. Please contact the factory.

CONTACT US

Tell Us About Your Lighting Control Project

Have a question about your lighting control system needs?

Give us a call at:
(403) 287-8003

Already know what you’re looking for?
Fill out the form to submit a purchase order today.

Back to top